Singer SSG 9000 Manuel D'instructions page 6

All manuals and user guides at all-guides.com
• The appliance is not to be used if it has been dropped,
if there is visible sign of damage or if it is leaking. Do
not use the appliance if the power cord or the plug
are damaged, or if the appliance is faulty. To prevent
any accident, all repairs, including the replacement of
the power cord, must be carried out by an Authorised
Service Centre or, in any case, by qualified personnel.
Warning of burns
• Never try to iron garments being worn.
• Do not touch the metal parts of the iron when in
operation and for several minutes after it is turned off
since it could cause burns.
• Do not aim the jet of steam towards parts of the body
or pets.
CAUTION: Hot Surface
Warning - material damage
• Place the appliance on a work surface that bears a
temperature of at least 90°C. Do not place on delicate
surfaces, sensitive to heat and humidity.
• Remove any labels and protections from the soleplate
before using the appliance for the first time.
• Always unwind the power cord before use.
• The use of extensions not approved by the
manufacturer can result in damage to property and
personal injury.
• Using the appliance with no water in the tank may
damage the pump.
• Do not use sparkling (carbonated) water. If your water
supply is very hard, we suggest you use demineralised
water instead.
• When the iron is hot, do not rest it onto the connecting
cable or the power cord. Take special care in ensuring
that the cable and the cord do not come into contact
with the soleplate when it is hot.
• Do not pull the power cord to unplug the appliance.
• The appliance must only be cleaned with a soft, slightly
damped, cloth after unplugging the iron and allowing all
its parts to cool down. Never use solvents which may
damage the plastic parts.
6