Publicité
Les langues disponibles
Les langues disponibles
RM-X151 Card Remote
Commander
1
OFF
2
SOURCE
3
4
DSPL
1
4
5
10
6
ATT
7
SEL
MODE
8
+
9
–
q;
SCRL
2
3
qa
5
6
+
VOL
–
Remove the insulation film before use (page 6).
A OFF button
To turn off the power; stop the source.
B SOURCE button*
To turn on the power; change the source
(Radio/CD/USB/SensMe™*
C < (.)/, (>) buttons
To control Radio/CD/USB/SensMe™, the
same as (SEEK) –/+ on the unit.
Setup, sound setting, etc., can be operated by
< ,.
D DSPL (display) button
To change display items.
E VOL (volume) +*
To adjust volume.
F ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
G SEL (select) button
The same as the select button on the unit.
H MODE button*
1
Press to select the radio band (FM/AM).
Press and hold to enter/cancel the passenger
control.
I M (+)/m (–) buttons
To control CD/USB/SensMe™, the same as
(1)/(2) (ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
M m.
J SCRL (scroll) button
To scroll the display item.
K Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 If an HD Radio tuner or SAT tuner is connected:
when (SOURCE) is pressed, the connected device
("HD," "XM" or "SR") will appear in the display.
Furthermore, if (MODE) is pressed, you can switch
the HD Radio tuner band or SAT tuner band.
*2 When a USB device set up for the SensMe™
function is connected.
*3 This button has a tactile dot.
1
2
/AUX).
/– button
3
Publicité
