HQ Power HQLE10037 Mode D'emploi page 6

Install your pattern into the projector. To do so, open the projector and rotate the
pattern holder to the left to unlock. Remove the pattern holder from the projector,
remove the inner ring from the holder and install the pattern. Re-insert the ring in the
holder and re-install the pattern holder into the projector. Turn to the right to lock the
holder.
Install the projector. Refer to chapter 4. Installation.
Switch on your projector and choose the function. Flick the on-off switch to the far left
for the auto function: the projector will automatically switch off after 6 hours. Flick the
on-off switch to the far right to leave the projector switched on. Carefully pull or push
the lens ring to adjust the focus. Adjust the rotation speed with the speed adjustment
knob.
Switch off and disconnect from the mains after use.
7. Cleaning and Maintenance
Before starting any cleaning or maintenance activities:
1. Unplug the device's power cord from the outlet.
2. Let the device cool down.
Cleaning
Use normal glass cleaner and a soft cloth to wipe off the outside casing.
Always be sure to dry all parts completely before plugging the device back in.
Cleaning frequency depends on the environment in which the unit operates (i.e. smoke,
fog residue, dust, dew).
Do not immerse the device in any liquid.
Maintenance
All screws should be tightened and free of corrosion.
The housing, the lenses, the mounting supports and the installation location (e.g.
ceiling, suspension, trussing) should not be deformed, modified or tampered with; e.g.
do not drill extra holes in mounting supports, do not change the location of the
connections...
Mechanically moving parts must not show any signs of wear and tear.
The electric power supply cables must not show any damage. Have a qualified
technician maintain the device.
There are no user-serviceable parts, apart from the fuse and the lamp.
Refer to an authorized dealer for service and/or spare parts.
V. 01 – 04/01/2018
HQLE10037
6 ©Velleman nv