Publicité
Les langues disponibles
Les langues disponibles
4.
Installation
4.1
General Guidelines
Install the device on an even, fire-resistant, scratch-resistant, water-resistant and non-
slippery surface.
The carrying construction must be able to support 10 times the weight of the device for
1 hour without deforming.
Make sure there is no flammable material within a 1 m radius of the device.
Install the device in a location with few passers-by that is inaccessible to unauthorised
persons.
Install the device in a location where you can easily access the power cord.
Install the device in a well-ventilated area.
4.2
Installation
As a rule, install the projector at a distance of 1 to 15 meters from the projection
surface.
The projector can be installed indoors or outdoors.
5.
Overview
Refer to the illustrations on page 2 of this manual.
1
2
6.
Operation
Select your pattern. You can also make your own pattern. Choose or design your
pattern and print it on a transparent sheet. Cut it to measure, i.e. with a diameter of
35 mm.
V. 01 – 04/01/2018
zoom
open
HQLE10037
3
4
5
speed adjustment
on-off
©Velleman nv
Publicité
