Publicité
Les langues disponibles
Les langues disponibles
Insignia NS-42EPTV 42" Plasma TV
3 Press the
or
button one or more times
to highlight Manual Ch Set, then press the
OK or
button to access the Manual Ch Set
options.
4 Press the
or
button to select a channel,
then press the OK button to add or delete a
channel. If a channel is in the channel list, it
will have a mark beside it.
5 Press the EXIT button to close the menu.
Changing channels
To change channels:
•
Press the CH
or
your TV or the CH – or + button on the
remote control to go to the next lower or
higher channel.
Or
Press the number buttons to select a
channel. For example, if you want channel
83, press 8, then press 3.
Or
Press the
button to go to the last viewed
channel.
Selecting a digital sub-channel
Most digital TV channels have more than one
channel. The main channel carries the signal for
the main TV program. The sub-channels carry
signals for additional or alternate programming,
such as a radio or news broadcast.
For example, if the main channel number is 8,
the sub-channel might be 8-1, 8-2, and 8-3.
To select a sub-channel:
1 Press the number buttons for the main
channel, for example 8.
2 Press the – button, the press the sub-channel
button, for example 1.
Adjusting the volume
To adjust the volume:
•
Press VOL
or
button on the front of your
TV or the VOL – or + button on the remote
control to decrease or increase the volume.
•
Press the MUTE button to turn off the sound.
Press the MUTE button again to turn the
sound back on.
Displaying status information
To display status information:
•
Press the INFO button. Your TV displays
status information, such as the channel
number or signal source.
Selecting the video input source
To select the video input source:
•
Press the INPUT button one or more times to
select the video source. You can select:
•
TV–TV signal
•
Composite1–AV INPUT1 jacks
•
Composite2–AV INPUT2 jacks
•
Component1–COMPONENT INPUT1
jacks
Checking the DTV signal strength
button on the front of
Adding a channel label
Freezing the picture
Warning
Setting the clock
www.insignia-products.com
•
Component2–COMPONENT INPUT2
jacks
•
VGA–D-SUB jack (computer)
•
HDMI–HDMI jack
•
S-Video–S-Video jack
To check the DTV signal strength:
1 Press the MENU button.
2 Press the
or
button one or more times
to highlight Setup, then press the OK or
button to open the Setup menu.
3 Press the
or
button one or more times
to highlight DTV Signal, then press the OK
or
button. Your TV shows the DTV signal
strength.
To add a label to a channel:
1 Press the MENU button.
2 Press the
or
button one or more times
to highlight Setup, then press the OK or
button to open the Setup menu.
3 Press the
or
button one or more times
to highlight Channel Labels, then press the
OK or
button to open the Channel Labels
Menu.
4 Press the
or
button to move the highlight
or cursor. Press the
or
between NTSC or ATSC or to select a
channel number or character.
5 Press the OK button to return to the previous
menu or press the EXIT button to close the
menu system.
You can freeze (still) the screen image.
To protect your TV, do not freeze the screen image for long
periods of time.
To freeze or unfreeze the picture:
•
Press the FREEZE button.
You can automatically set the clock from a digital
channel signal. Your TV searches for a digital
channel that has time information encoded. If the
clock is not correct after you automatically set it,
you can manually set the clock.
Automatically setting the clock
To automatically set the clock:
1 Press the MENU button.
2 Press the
or
button one or more times
to highlight Feature, then press the OK or
button to open the Feature menu.
3 Press the
or
button one or more times
to highlight Time Set, then press the OK or
button to open the Time Set menu.
4 Press the
or
button one or more times
to highlight Time Set Mode, then press the
OK or
button to select Auto.
button to toggle
15
Publicité
