KTM 61713931144C1A Instructions De Montage page 20

5 ASSEMBLY
5.1
8
Assembly
501265-01
501266-01
501267-01
–
5
Loosen screw and remove the handlebar weight.
–
2
Mount collar bushing
included).
Info
2
Collar bushing
models:
KTM 125 DUKE from model year 2017, KTM 250
DUKE from model year 2015, KTM 390 DUKE from
model year 2013
RC 125/250/390 from model year 2017
KTM 790 DUKE from model year 2018
KTM 890 DUKE R from model year 2020, 890 DUKE
from model year 2021
KTM 1290 SUPER DUKE R from model year 2020
–
Mount brake lever protection
5
nal screw , outer clamp
6
clamp .
Info
4
Outer clamp is only required for the following
models:
KTM 790 DUKE from model year 2018
KTM 890 DUKE R from model year 2020, 890 DUKE
from model year 2021
KTM 1290 SUPER DUKE R from model year 2014 and
1290 SUPER DUKE GT from model year 2016
Info
On the following models, the brake lever protection
(incl. collar bushing) is mounted with the original screw
3
and bushing (included) only.
KTM 125 DUKE from model year 2017, KTM 250
DUKE from model year 2015, KTM 390 DUKE from
model year 2013
RC 125/250/390 from model year 2017
–
Position brake lever protection
Guideline
Screw, handlebar
weight
The brake lever protection is located at the same height as
the brake lever.
1
on brake lever protection
is only required for the following
1
to the handlebar with origi-
4
(included) and inner original
1 5
and tighten screw
M6 10 Nm (7.4 lbf ft)
(both
.