Fulgor Milano CREATIVE CH 1004 ID TS Mode D'emploi page 32

Functions
Switching the Touch Control ON/OFF
After switching on the power, the touch
control takes about 1 second before it is
ready to use. After a reset all displays and
GB
LEDs glow for approx. 1 second. When this
time is over all displays and LEDs extinguish
and the control is in the stand-by mode.
By operating the ON/OFF key the control
can be turned into the ON-mode. The
cooking zone displays show a static "0". If
a cooking zone is in the "hot" status, the
display shows a static "H" instead of "=".
The lower right corner of all cooking point
displays flash at one-second intervals to
indicate that no cooking areas has been
selected at the time.
After switching ON the electric control
remains activated for 20 seconds. If no
cooking zone or timer selection follows
within this period of time, the electronic
control automatically switches back into the
stand-by mode.
The control can only be switched ON if it
identifies the ON/OFF key alone being
operated. Should it recognize key activation
other than that, the control remains in the
stand-by mode.
If the child safety feature is active when
switching on, all cooking zones show "L"
(LOCKED). If the cooking zones are in a
"hot" status, the display shows "L" and "H"
in alternation.
When the Touch Control is ON it can be
switched OFF at any time by operating the
ON/OFF key. This is also valid if the control
has been locked (activated child safety
feature).
The ON/OFF key has always priority in the
switch-OFF function.
All manuals and user guides at all-guides.com
Automatic switch-OFF
When the control is ON it automatically
switches OFF after 20 seconds if no cooking
zone or select key has been operated within
this period of time. In the case of a cooking
selection, the automatic switch-OFF time is
composed of 10 seconds deselection time for
a cooking zone at setting "0" and 10 seconds
switch-OFF time.
Hob zone On/Off
With the Touch Control on, a hob zone
can be selected by touching the dedicated
display (6). The corresponding display them
shows the fixed spot on the display and "0"
rather than "H" – for very hot hob zones. The
spots disappear on the display for all other
hob zones.
At this point the cooking level can be selected
by means of the Slider. In this way the
corresponding hob zone is activated. The
maximum and minimum values are "9" (to the
right) and "0" (to the left).
Turning a single hob zone off
A single hob zone can be turned off by
selecting a cooking level [0]. If a hot hob zone
warning light is on [H], this signal is alternately
displayed with [0] and simultaneously with
the spot on the display.
Once the Touch Control is turned off, the
display remains black or the symbol [H] is
displayed as a warning of a hot hob zone.
Switching OFF all cooking zones
Immediate switching OFF of all cooking
zones can be achieved anytime by means of
the ON/OFF key. Once the Touch Control is
switched off, the display remains off or the
system [H] is displayed as a warning that the
cooking area is hot.
32