Braun 7 Serie Mode D'emploi page 8

Accessories
Available at your dealer or Braun Service Centres:
• Foil & Cutter cassette 70S/70B
Environmental notice
Product contains batteries and/or recyclable electric waste.
For environment protection do not dispose of in household waste, but
for recycling take to electric waste collection points provided in your
country.
Subject to change without notice.
For electric specifications, see printing on the special cord set.
Trouble-Shooting
Problem:
SHAVER
Unpleasant
smell from the
shaver head.
Battery
performance
dropped
significantly.
Shaving
performance
dropped
significantly.
Shaver turns
off with fully
charged
battery.
8
Possible reason:
Shaver head is cleaned
with water.
1. Foil and cutter are
worn which requires
more power for each
shave.
2. Shaver head is
regularly cleaned
with water but not
lubricated.
1. Foil and cutter are
worn.
2. Personal setting of
shaving performance
has been changed.
3. Shaving system is
clogged.
Foil and cutter are worn
which requires more
power than the motor
can deliver. The
appliance turns off.
Remedy:
When cleaning the shaver head
with water only use hot water and
from time to time some liquid
soap (without abrasive
substances). Remove Foil &
Cutter cassette to let it dry.
1. Renew Foil & Cutter cassette.
2. If the shaver is regularly
cleaned with water, apply a
drop of light machine oil on top
of the foil once a week for
lubrication.
1. Renew Foil & Cutter cassette.
2. For a thorough and fast shave
we recommend the green
(intensive) setting.
3. Soak the Foil & Cutter cassette
into hot water with a drop of
dish liquid. Afterwards rinse it
properly and tap it out. Once
dry apply a drop of light
machine oil on the foil.
– Renew Foil & Cutter cassette.
– Regularly oil the shaving
system, especially when
cleaning with water only.