Bosch Heat Convector 4000 Serie Notice D'utilisation Destinée À L'utilisateur page 58

Operation
Table 57 Program P2
P2 is the recommended predefined program for midday
absence during the day (operating mode ECO:22:00...06:00
o'clock, 08:00...12:00 Clock and 14:00...18:00; heating
Duration 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Operation
mode
Table 58 Program P3
P3 is the predefined program which is recommended for
continuous absence, on Saturday or Sunday for example
Duration 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Operation
mode
Table 59 Program P4
P4 is the recommended predefined program for continuous
operation in the heating mode operating mode.
Duration 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Operation
mode
Table 60 Program P5
P5 is the recommended predefined program for continuous
operation in the ECO operating mode.
4.5.5 Setting (individual) day program P6
If the week day and time were previously set, the day program
P6 has already been selected and the first two action steps can
be omitted.
To set the day program P6:
▶ Call up the parameter settings menu ( Chapter 4.3.1,
page 55).
▶ Call up the day program settings menu (P6)
( Chapter 4.3.2, page 55).
P6/no flashes on the display.
▶ Press the or key until P6/go appears.
Duration 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Operation
mode
Table 61 Program P6 (can be adjusted individually)
P6 has the predefined settings of program P1 (operating mode
ECO:22:00...06:00 Clock and 08:00...18:00 Clock; heating
58
mode operating mode: 06:00...08:00 o'clock, 12:00...14:00
Clock and 18:00...22:00 o'clock).
(operating mode ECO:22:00...08:00 Clock; heating mode
operating mode: 08:00...22:00 o'clock).
▶ Press the key to confirm P6/go.
00/Ec flashes on the display.
00 stands for the hours and Ec stands for the operating
mode ECO.
▶ Press the or key to change the Ec (ECO) operating
mode to Co (heating mode).
▶ Press the key to confirm the set operating mode for the
hour displayed.
01/Ec flashes on the display.
▶ Repeat the operation for every hour from 0 to 23.
After the last hour has been set (23), P6/no flashes on the
display.
▶ Press the key to confirm the day program P6.
The week program (7d) appears on the display.
The table shows the predefined settings of the day program P6.
mode operating mode: 06:00...08:00 Clock and
18:00...22:00 o'clock).
Heat Convector 4000 – 6720883017 (2022/12)