Lamborghini Caloreclima EM 16-E Notice D'installation Et D'entretien page 36

ADJUSTMENTS
COMBUSTION HEAD ADJUSTMENT EM 16-E
Adjust the combustion head by acting on the screw A according to the indications
shown on the index.
COMBUSTION HEAD ADJUSTMENT EM 26-E
- Loosen the knobs B.
- Acting on these modifies the position of the draught tube with respect to the
combustion head. Lining knobs up with values 1, 2 or 3 gives minimum, medium
and maximum burner delivery respectively.
- Once adjustment has been completed tighten the knobs B.
COMBUSTION AIR ADJUSTMENT
Adjustment of combustion air is effected from the outside of the cover. After loo-
sening screw C act on air adjustment screw D refer to the label. Once adjustment
has been completed tighten screw C.
GAS VALVE ADJUSTMENT
The maximum delivery and the start up delivery must be set.
MAXIMUM DELIVERY ADJUSTMENT
- Assemble a gauge to measure the gas pressure at the burner head.
- Open the gas valve to the maximum.
- While the burner is working, act on the stabilizer until the required delive-
ry is reached (read the meter): read the pressure value on the gauge.
- Act on the valve adjustment by turning the valve towards off until the
pressure on the gauge just hints at decreasing. At this point the maxi-
mum delivery required is set and controlled by both the stabilizer and the
gas valve.
- 36
-
Reference index
Gauge