Bimar PA98 Serie Notice D'instructions page 26

- " " button: the ionising function produces a flow of negative ions which neutralise
the positive ions in the air. This function is activated whenever the button is pressed;
the light corresponding to the button will illuminate on the display and the "
symbol will appear on the screen.
- " " button: press the button repeatedly to turn on the light
(underneath the control panel, as shown on the right) with
variable colour effects, steady (blue) and off; cannot be
operated with night mode active. If the device is in standby
(wi-fi light remains on), only the steady light is available.
- Filter, comprising:
•
one H13 HEPA filter: traps PM2.5, smoke, dust mites and other pollutants
•
one pre-filter: traps larger particles such as hairs, fluff or threads.
•
1 activated carbon filter: absorbs harmful substances such as unpleasant odours,
mould and formaldehyde
Filter change alert light: the light
reset the light, press the "
device, remove the plug from the power socket and change the filter.
The app's main screen shows concentric graphics and the
countdown of the hours left until filter replacement during
operation (total hours at start of count: 4320hr)
•
To deactivate the device, press the"
switch off the device, remove the plug from the power socket.
When not in use for long periods, the plug must always be removed from the socket.
) flashes (red) whenever the filter needs changing. To
" button (or use the App) for about 3 seconds, switch off the
" button: the "
26/64
" symbol remains on. To
"