Bimar PA98 Serie Notice D'instructions page 21

• The plug point must be accessible so as to easily remove the plug in case of an emergency.
• Stand the appliance on a flat, horizontal and stable surface, and keep it away from:
- fans
- heat sources (e.g. open flames, gas stoves, fire places etc.), flammable gasses or
explosive materials
- liquids (e.g. from bathtubs, showers, sinks etc.) to avoid splashing water and to prevent it
from falling into them (the appliance should be kept a minimum of 2 metres away).
- fabrics (curtains, etc.) or floating materials/particles that may block the aspiration grid;
check also that the front part is free from floating particles (dust, etc.).
• If there is a fault or the appliance is not working correctly, switch it off and have it checked
by a qualified professional. Repairs done by an unqualified person can be dangerous and
cause the guarantee to become void.
DESCRIPTION
Smart device with integral wi-fi, usable via Smartphone using an app with Android or iOS
operating systems.
•
Purifier electronics with integral wi-fi allowing Smartphone-purifier communication
via an App.
•
App (application) allowing remote control of the following device functions: (On-
standby); adjustable air flow, "Change filter" warning light, Mode: Normal/ Sleep,
Light with colour effects, steady or off, ioniser.
•
Check that the router is for domestic use (i.e. it does not have any access restrictions
except the password), that the wi-fi network is 2.4G Hz, and that there is a strong,
uniform wi-fi signal in the room where the device is to be installed.
•
Make sure that the smartphone is connected to the wi-fi network to be used for the
purifier.
1.1 First Installation/Setup
1. Install the "BIMAR life Smart" App by downloading it from Google Play (Android) or
AppStore (iOS), or scan the QR code provided here to install.
For Android
2. Once installed, the app icon appears in the smartphone screen.
Click the "Bimar Live Smart" icon to run the app.
3. To start registration:
- click "Register" and confirm the "Privacy Policy Statement" with "I agree" to continue
For iOS
21/64