Télécharger Imprimer la page

Anker SOLIX F1500 Mode D'emploi page 6

Publicité

Les langues disponibles

Les langues disponibles

FAQ
Q1: Why does the Power Station's battery drain even when no devices are connected?
When the AC and Car Socket control button is turned on, even if no devices are being charged, there will still
be a certain amount of no-load power consumption. To avoid this, make sure the AC and Car Socket charging
button is off or turn on the power saving mode when you're not using the Power Station.
Q2: What's the max power output of the AC output ports?
The AC output ports can deliver a maximum of 1800W to connected devices.
Q3: Can I recharge the product while charging connected devices?
Yes.
Q4: Can this product power a CPAP machine?
Yes, but make sure to turn off the power saving mode first.
Q5: What kind of solar charger can charge this product?
Any 11-60V solar charger with an XT-60 female connector.
Specifications
Cell Capacity
1536 Wh
AC Input Voltage
100-120V~ 12A Max, 50Hz/60Hz
AC Input Power (Charging)
1000W Max
AC Input Power (Bypass Mode)
1440W Max
Solar Panel Input
11-32V
Car Charger Output
12V
10A Max
AC Output
120V~ 15A, 60Hz, 1800W Max
USB-A Output
5V
2.4A (2.4A Max Per Port)
USB-C Output (100W)
5V
3A/9V
USB-C Output (60W)
5V
3A/9V
UPS
<20ms
Discharging Temperature
-4°F-104°F / -20°C-40°C
Charging Temperature
32°F-104°F / 0°C-40°C
Size
46.3*28.8*23.7 cm/ 18.2*11.3*9.3 inches
Net Weight
19.8 kg/ 43.7 lb
07 EN
10A; 32V-60V
12.5A (600W Max)
3A/15V
3A/20V
3A/20V
5A (100W Max)
3A/15V
3A/20V
3A (60W Max)
Attention
Not permitted on aircraft.
IMPORTANT SAFETY INSTRUCTIONS
WARNING - When using this product, basic precautions should always be followed, including the following:
Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary when the product is used near children.
• Do not put fingers or hands into the product.
• Do not expose the product to rain or snow.
• Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of
fire or injury to persons.
To reduce risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting
the product.
• Do not use the product in excess of its output rating. Overload outputs above rating may result in a risk of fire
or injury to persons.
• Do not use the product that is damaged or modified. Damaged or modified batteries may exhibit unpredictable
behavior resulting in fire, explosion or risk of injury.
Do not operate the product with a damaged cord or plug, or a damaged output cable.
• Do not disassemble the product. Take it to a qualified service person when service or repair is required.
Incorrect reassembly may result in a risk of fire or electric shock.
• Do not expose to fire or high temperatures. Exposure to fire or temperatures above 130°C may cause explosion.
To reduce the risk of electric shock, unplug the power pack form the outlet before attempting any instructed
servicing.
• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure
that the safety of the product is maintained.
• When charging a device, the product may feel warm, this is a normal operating condition and should not be
cause for concern.
When charging the internal battery, work in a well ventilated area and do not restrict ventilation in any way.
• Do not clean the product with harmful chemicals or detergents.
• Misuse, dropping or excessive force may cause product damage.
• When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems
separate from each other.
CAUTION: Risk of explosion if the battery is replaced by an incorrect one.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an
explosion;
• Leaving a battery in an extremely high temperature environment can result in an explosion or leakage of
flammable liquid or gas;
• A battery subjected to extremely low air pressure may cause an explosion or leakage of flammable liquid or
gas;
• Unplug the AC power cable to disconnect from line voltage.
WARNING: GROUNDING INSTRUCTIONS
This product must be grounded. In the event of malfunction or breakdown, grounding provides a path of least
resistance for electrical current to reduce the risk of electric shock. This product is equipped with a cord having
an equipment grounding conductor and a grounding plug. The plug must be plugged into an outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
WARNING – Improper connection of the equipment grounding conductor may result in an electric shock. Check
with a qualified electrician if you are in doubt as to whether the product is properly grounded. Do not modify
the plug provided with the product – if it does not fit the outlet, have a proper outlet installed by a qualified
electrician.
Storage and Maintenance instructions
1. Store the product between 32°F-104°F (0°C-40°C). Avoid exposing the product to rain or using the product in
a humid environment.
EN 08

Publicité

loading