ENGLISH
temperature if possible. The temperature can be adjusted at any time during the cooking
process. If you can only adjust the pressure, you can do so by pressing the pressure button
during cooking.
-
Once you have selected the menu, time, pressure and temperature (if necessary), press the
GM button to start the cooking process and your programmable cooker will start cooking
for you. The first phase is preheating, as it is the actual cooking time that you select.
-
During the heating process, a series of moving dashes will appear on the display, as
soon as this process has been completed, the selected cooking time will be displayed
and a countdown will be performed, with each elapsed minute being deducted from the
originally programmed minute. Fig.7 and 8
-
You will know that the Olla GM cooker has finished cooking because you will be alerted by
voice: "the food is made". From this moment on, as long as you have chosen a menu with
a cooking temperature higher than 80°C, the hot function will be switched on indefinitely
(except in Ferment, Comfit and Poach) and you will be warned when you hear the phrase:
"food is kept warm". Your cooker will keep the food warm until the moment you decide to
eat it. (Fig.9). In addition, you can activate this function whenever you want by pressing the
GM button at any time, it will only be cancelled by pressing the GM button for more than 1
second (Fig.10).
-
You can also reheat without overcooking by pressing the GM button twice. Fig.11
-
To open the lid, you must ensure that there is no pressure inside the cooker by moving the
pressure valve to the open position using the position knob (otherwise you will not be able
to open the lid). The cooker will release all the steam inside. Never touch the metal parts of
the cooker while cooking or just after cooking. Fig.12
How to schedule a meal for a certain time
-
Whenever you turn on the cooker, the voice control will suggest you to choose a menu to
cook on the spot or to set the eating time for later. The eating time is adjusted differently
from previous models. First of all, once the clock button is pressed, we will select within
how many hours we want the meal to be ready and press the GM button to confirm. If we
also want to set the minutes, you will select them once the hours have been set, to do so,
will turn the knob adjusting from minute to minute, up to a limit of 24 hours.
-
Then set the menu, cooking time, temperature and pressure as described in the previous
section. Finally, press the GM button to set your schedule.
-
The cooker automatically calculates when to start so that the food is freshly cooked at
the set time. In case the cooking time is longer than the time until the set eating time, your
cooker will automatically start the cooking process to get as close as possible to the preset
time.
-
If I set the cooker for less than 3 hours from now, I would start cooking immediately and
keep the food warm until eating time, preserving all its properties and preserving its
flavour. The Model H has an EPROM memory, if during cooking or standby there is a power
failure the cooker will remember its programming and as soon as the power comes back
on it will continue the cooking process.
46
OLLA GM MODELO H OVALL
6. CLEANING AND MAINTENANCE
-
All parts and components of the product that come into contact with food must be washed
after each use.
-
Remove the pressure valve and the safety valve next to it and clean the cover carefully.
-
Use a damp cloth, soap and water to clean the inside of the product and then rinse it.
-
Dry it thoroughly with a cloth.
-
Do not attempt to repair it by yourself. Contact the official Technical Support Service of
Cecotec.
-
Clean the silicone sealing ring after each use. To do this, remove it from the lid and wash it
separately with soap and water. Then rinse it with water and dry it with a dry cloth.
-
Remove the inner pot and wash it with soap and water. Then rinse it with water and dry it
with a dry cloth.
Warning
The inner pot is dishwasher safe, but it is recommended to wash it by hand to keep the coating
in better condition for a longer period of time.
-
Use a soft, damp cloth to clean the product's outside surface.
-
Do not use abrasive cleaners or scouring pads to clean the product.
-
Do not immerse the main body of the product or the power cord in water or any other liquid.
-
Clean the base of the product with a wet soft cloth.
After cleaning
Make sure to place the silicone sealing ring correctly back into position.
Check pressure and valves and make sure they are working properly.
Make sure that all components are correctly installed in position and completely dry before
using the product again.
Safety
The programmable cooker has 14 interlocking safety systems that operate simultaneously.
The exclusive safety valve system prevents your cooker from opening as long as there is
pressure inside, therefore, in order to open or close your cooker, it is essential that we remove
the steam inside by placing the pressure valve in the open position.
ENGLISH
OLLA GM MODELO H OVALL
47