GLÄSS AUDIO DESK SYSTEME VINYL CLEANER PRO Mode D'emploi page 29

All manuals and user guides at all-guides.com
6.1.1 Installing the 7" Single Kit
1. Place VINYL CLEANER
PRO on a level surface.
– Check by using the
spirit level (5).
– The air bubble should
be positioned roughly
in the middle of the
circular marks.
Put the extension sup-
ports (picture 1) onto
the drive rollers. The
extension supports
attached magnetically.
2. Both reel seats must
not be tilted! Please
insert them straight into
the designated adaptor
sockets and make sure
the positioning is
correct:
guide pulleys must be
pointing towards each
other.
Reverse sequence to
remove. Simply tilt and
remove extension sup-
ports.
Picture 1
Picture 2
29