Publicité
Les langues disponibles
Les langues disponibles
8 Your computer restarts.
NOTE: If your system does not detect a recovery
partition, it will prompt you to insert a recovery disc.
9 In the Recovery Manager Welcome window, click the
Advanced options button.
10 Click Recover your computer to its original
factory condition, and then click Next.
11 If you are prompted to back up files, and you have
already done so, click No, and then click Next.
12 System recovery begins. After system recovery is
complete, the computer restarts.
13 Complete the registration process, and wait until you see
the desktop.
14 Turn off the computer, reconnect all peripheral devices,
and turn the computer back on.
15 Perform the procedure "Performing the post-recovery
procedure" on page 15.
System recovery at system startup
If Windows Vista is not responding, but the computer is
working, use these steps to perform a system recovery:
NOTE: System Recovery deletes any data or programs that
you created or installed after purchase. Therefore, ensure
you have backed up to a removable disc any data that you
want to keep.
1 Turn off the computer. If necessary, press and hold the
On button until the computer turns off.
2 Disconnect all peripheral devices from the computer,
except the monitor, keyboard, and mouse.
3 Press the On button to turn on the computer.
4 As soon as you see the initial company logo screen
appear, repeatedly press the F11 key on your keyboard
until the Recovery Manager window opens.
5 Click Advanced options.
6 Click Recover your computer to its original
factory condition, and then click Next.
7 If you are prompted to back up files, and you have
already done so, click No, and then click Next.
8 System recovery begins. After system recovery is
complete, the computer restarts.
9 Complete the registration process, and wait until you see
the desktop.
10 Turn off the computer, reconnect all peripheral devices,
and turn the computer back on.
11 Perform the procedure "Performing the post-recovery
procedure" on page 15.
14
All manuals and user guides at all-guides.com
Starting system recovery from
recovery discs
This section contains the procedure for performing a system
recovery from the recovery discs you created as described
in "Creating Recovery Discs" on page 13.
NOTE: System Recovery deletes any data or programs that
you created or installed after purchase. Therefore, ensure
you have backed up to a removable disc any data that you
want to keep.
To perform a system recovery program using recovery discs:
1 If the computer is working, create a backup CD or DVD
2 Insert recovery disc #1 into the disc slot.
3 If the computer works, click the Windows Vista start
4 Disconnect all peripheral devices from the computer,
5 Press the On button to turn on the computer.
6 A window may open, prompting you to choose between
7 Choose to run from the recovery discs, and then
8 In the Recovery Manager Welcome window, click the
9 Click Recover your computer to its original
10 If you are prompted to back up files, and you have
11 If you are prompted to insert the next recovery
12 When the Recovery Manager is finished, remove the
13 Click Finish to restart the computer.
containing all the data files you want to save. When you
are done, remove the backup disc from the disc slot.
CAUTION: All data on the hard disk drive will
be deleted. You will lose data if it is not
backed up.
button, click the Arrow button next to the Lock button,
and then click Shut Down.
Or
If the computer is not responding, press and hold the On
button for approximately 5 seconds, or until the computer
turns off.
except the monitor, keyboard, and mouse.
running system recovery from the discs or from your hard
drive.
click Next.
Advanced options button.
factory condition, and then click Next.
already done so, click No, and then click Next.
disc, do so.
last recovery disc.
Publicité
