Setting up:
The Water Control may only be set up vertically
with the sleeve nut to the top to prevent water
penetrating into the battery compartment.
The minimum water output to ensure that the
Water Control functions correctly is 20 – 30 l/h.
For example, at least 10 x 2-litre Drip Heads are
required to control the Micro-Drip-System.
At high temperatures (over 70 °C at the display)
the LCD display may extinguish. This does not
affect the program in any way. When the com-
puter cools down the LCD display illuminates
again.
The max. temperature for the water flow is
40 °C.
Avoid tensile strain.
v Do not pull the hose connected to the
Water Control.
18
1892-20.960.05.indb 18
1892-20.960.05.indb 18
CAUTION!
If the control section is removed when the valve
is open, the valve remains open until the control
section is reattached.
DANGER!
Cardiac arrest!
This product makes an electromagnetic field
while it operates. This field may under some
conditions interfere with active or passive medi-
cal implants. To decrease the risk of conditions
that can possibly injure or kill, we recommend
persons with medical implants to speak with
their physician and the medical implant manu-
facturer before you operate the product.
DANGER!
Risk of suffocation!
Small parts can be easily swallowed. There is
also a risk that the polybag can suffocate tod-
dlers.
v Keep toddlers away when you assemble the
product.
17.04.23 11:04
17.04.23 11:04