Télécharger Imprimer la page

Dimplex 690932 Serie Manuel Du Propriétaire page 13

Publicité

Les langues disponibles

Les langues disponibles

Operation
using the buttons on the remote the
lighting of the unit can be adjusted
to any shade of any colour. The
initial setting is no light (R=0, B=0,
G=0) and can be adjusted, while the
display is flashing, by pressing the
outlined buttons (below) to adjust the
tones.
Red Tones:
decrease.
Green Tones:
decrease.
Blue Tones:
decrease.
!
NOTE: There are 25 different set-
tings for each colour.
9.
Brightness: Changes the
brightness of the lights in the unit.
→ Adjusted by repeatedly press-
ing the corresponding button on
the remote.
• Indicated by the second digit on
the Floating Display™ changing
to show: "A" (high), "b" (low), "C"
(high with media flicker) and "d"
(low with media flicker).
!
NOTE: Media flicker is not an
option on the Multi-Fire XD™ levels
5, 6 or P.
10.
Sleep timer: turns the unit off
after a preset duration (from 30
minutes (0.5h) to 8 hours, in ½
hour increments).
All manuals and user guides at all-guides.com
increase and the
increase and
increase and
→ Activated and adjusted by re-
peatedly pressing the correspond-
ing button on the remote.
• Indicated by the Floating
Display™ changing to indicate
30 minutes (0.5 h) through 8
hours. The fireplace will automati-
cally turn off when the sleep timer
reaches zero minutes. The sleep
timer can be cancelled at any time
by pressing the sleep timer button
repeatedly until the sleep timer
will no longer be visible.
11. Numerical Display
→ Default display will be the
heater air intake temperature or
settings (eg. Multifire XD, Bright-
ness, etc.)
Disable Heat
If desired, depending on the sea-
son, the heater on the unit can be
disabled. The unit will operate in the
same fashion, with remainder of the
controls.
Pressing the
then
or disable the heater. When in the
heat disable mode the temperature
reading/setting on the On Screen
Display displays nothing ("--").
!
NOTE: The heat will not work in
manual controls either.
will enable
13

Publicité

loading

Ce manuel est également adapté pour:

Pf2325Pf3033