Klarstein 10032053 Mode D'emploi page 27

All manuals and user guides at all-guides.com
Water supply connection
NOTE: Connect to potable water supply only. The water supply system must be
installed and connected by a professional technician.
Connect the refrigerator with the cold water pipe:
• Min. pressure: 1.4 bar
• Max. pressure: 6.9 bar
When using the function of ice maker, please make sure that the tap water pipe is
connected normally and the water valve is opened. Enough space shall be reserved for
the faucet connecting water source.Make sure the ice maker switch [ ].
After the refrigerator operates stably, the ice maker will make ice. Upon power-on
for the first time, cold water is available after 5 hours since the refrigerator operates
normally, and ice cubes or crushed ice is available after 12 hours.
USE AND OPERATION
Before Using
• Remove all packages, including the foam backing at the bottom of refrigerator and
the tapes fixing accessories in the box.
• Place the refrigerator to a proper position, and adjust the feet to level. It is better to
clean the refrigerator before use.
• Remove the film: There is a layer of transparent film on the panel of our product,
which can protect products from being scratched in the process of production and
transportation, and you can choose to reserve or remove the film as needed.
• Place the refrigerator and adjust to level, clean it, let the refrigerator stand for
above 2 ~ 6 hours, and then power on to ensure that the refrigerator can operate
normally.
Starting and function setting
• Connect the power cord, and turn on the power switch.
• Upon startup for the first time, the screen will display respective set temperature
values (the temperature of refrigerating chamber is set as 5°C,temperature of
freezing chamber -18°C)
• The default mode is energy saving upon startup: The screen displays for 20 seconds
and then goes off. This mode to save energy and prolong the service life of LED
lights.
EN
27