Operating Controls - Thermador T18IW Série Guide D'utilisation Et D'entretien

en-us

Operating controls

A
On/Off button
Serves to switch the whole appliance on and off.
B
Alarm button
Used to switch off the warning signal, see chapter
"Alarm function".
C
Display panel
The temperatures in both climatic zones
of the refrigerator compartment are shown
in the display panel. Activated special functions
are shown via "symbol".
The menus and setting options which are available
are represented on the display panel in the setup
mode, see chapter "Special functions".
D
Selection buttons
The temperature setting is activated using
the selection buttons, see chapter "Setting
the temperature".
For selecting a menu in the setup mode,
see chapter "Special functions".
E
Setting buttons
The temperature can be changed using the setting
buttons, see chapter "Setting the temperature".
More settings can be selected in the setup mode,
see chapter "Special functions".
F
"setup" button
This button starts and ends the setup mode.
If the setup mode is ended using the setup button,
the changes which have been made are stored.
G
Button Vacation
Is used to switch vacation mode on and off,
see chapter "Special functions", section "Vacation
mode".
8
Note:
A sound can be heard every time a button is actuated
if this function is activated in the sound menu during
the setup mode.
Symbols in the display field
Display for the upper climatic zone.
Display for the lower climatic zone
Humidity function is activated (see chapter
"Special functions", section "Humidity
function").
Holiday mode is activated, see chapter
Special functions.
For the setting options in the set up mode,
see chapter Special functions.
A warning message is displayed,
see chapter Alarm function.