Télécharger Imprimer la page

GE PCB910 Manuel Du Propriétaire page 42

Masquer les pouces Voir aussi pour PCB910:

Publicité

Les langues disponibles

Les langues disponibles

Before You Call For Service...
Troubleshooting Tips
Problem
Oven racks are
difficult to slide
Drawer does not slide
smoothly or drags
Warming drawer or
lower oven drawer
will not work
Excessive condensation Liquid in drawer.
in the drawer
Food dries out in the
warming drawer
42
Possible Causes
The shiny, silver-colored
racks were cleaned in a
self-clean cycle.
The drawer is out
of alignment.
Drawer is over-loaded or
load is unbalanced.
A fuse in your home may be
blown or the circuit breaker
tripped.
Controls improperly set.
Uncovered foods.
Temperature setting too high. • Reduce temperature setting.
Moisture escaping.
Drawer not fully closed.
What To Do
• Apply a small amount of vegetable oil to a paper
towel and wipe the edges of the oven racks with
the paper towel. Do not spray with Pam
lubricant sprays.
• Fully extend the drawer and push it all the way in.
See the Care and cleaning of the range section.
• Reduce weight. Redistribute drawer contents.
• Replace the fuse or reset the circuit breaker.
• See the Using the warming drawer section.
• Remove liquid.
• Cover food with lid or aluminum foil.
• Cover food with lid or aluminum foil.
• Push drawer in until latch engages.
or other
®

Publicité

loading

Ce manuel est également adapté pour:

Pcb940Pcb980