GE PCB910 Manuel Du Propriétaire page 27

Special features of your oven control.
12-Hour, 24-Hour or Clock Blackout
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour
military time clock or black out the clock
display, follow the steps below.
Touch the upper oven BROIL HI/LO
and BAKE pads at the same time until
the display shows SF.
Touch the CLOCK pad once. The
display will show 12 hr. If this is the
choice you want, touch the START
pad.
Auto Recipe Conversion
™
When using convection bake, the
Auto Recipe Conversion feature will
™
automatically convert entered regular
baking temperatures to convection baking
temperatures.
This feature is activated so that the display
will show the actual converted (reduced)
temperature. For example, if you enter
a regular recipe temperature of 176.7°C
(350°F) and touch the START pad, the
display will show CON and the converted
temperature of 162.8°C (325°F).
Cook and Hold
(on some models)
Your new control has a cook-and-hold
feature that keeps cooked foods warm for
up to 3 hours after the cooking function is
finished.
To activate this feature, follow the steps
below.
Touch the BAKE and BROIL HI/LO
pads at the same time until the
display shows SF.
Touch the CLOCK pad again to change to
the 24-hour military time clock. The display
will show 24 hr. If this is the choice you
want, touch the START pad.
Touch the CLOCK pad again to black out
the clock display. The display will show
OFF. If this is the choice you want, touch
the START pad.
NOTE: If the clock is in the black-out mode,
you will not be able to use the Delay Start
function.
(on some models)
To deactivate the feature:
Touch the upper oven BAKE and
BROIL HI/LO pads at the same time
until the display shows SF.
Touch the CONVECTION BAKE pad.
The display will show CON ON. Touch
the CONVECTION BAKE pad again.
The display will show CON OFF.
Touch the START pad.
To reactivate the feature, repeat steps
1–3 above but touch the START pad when
CON ON is in the display.
Touch the COOK TIME pad.
The display will show Hld OFF.
Touch the COOK TIME pad again
to activate the feature. The display will
show Hld ON.
Touch the START pad to activate
the cook-and-hold feature and
leave the control set in this
special features mode.
www.GEAppliances.ca
27