Publicité
Les langues disponibles
Les langues disponibles
Insert the filter unit into the dust tank, making sure that the tab on the filter unit covers
the rectangular hole of the dust tank.
IMPORTANT: To avoid damages, rinse filters ONLY with water. DO NOT use soap.
Allow filters to dry for at least 24 hours before placing them back in the vacuum
cleaner to prevent water from being sucked into electrical components.
Do not use hot water or detergents to wash the filters. If the filters are damaged,
replace them with new filters. Do not attempt to use the product without
reassembling the filters.
Cleaning the main body and its accessories:
Use a soft cloth to clean the surfaces of the vacuum cleaner, tube, motorized brush and
charging base.
Wash the 2-in-1 nozzle with a sponge soaked in dishwashing liquid and rinse with hot
water. Then, dry it with a soft cloth.
Appliance storage:
The vacuum cleaner and accessories should always be stored on the charging base.
When not in use for a long time, unplug the AC adapter from the power outlet.
V. TROUBLESHOOTING
ISSUES
CAUSES
SOLUTIONS
THE APPLIANCE
DOES NOT
The appliance is not charged.
Recharge the appliance.
WORK.
52
Publicité
