Publicité
Les langues disponibles
Les langues disponibles
Note:
The 2-in-1 nozzle is equipped with a brush
nozzle for vacuuming multiple surfaces
(see drawing as follows for use in nozzle
mode or brush mode).
F. Using the vacuum cleaner
Be careful not to fill the tank beyond the MAX marking indicated on
the tank.
When vacuuming wet or perishable waste, be sure to empty, clean
and dry the tank after use to avoid the formation of mould.
1. Remove the appliance from its base.
2. If necessary, select one of the supplied accessories and insert it into the suction head:
o the motorized brush for any surfaces;
o the nozzle is recommended for vacuuming in corners and areas that are
difficult to access.
3. Press the ON/OFF button to switch on the vacuum cleaner.
4. The vacuum speed is set by default on normal speed. To change the vacuuming
speed, press the speed selector button. Each press of the button allows you to select
one of the following two suction speeds: normal and turbo. The vacuum time in turbo
speed is 20 minutes and on normal speed 40 minutes.
5. When in use, the indicator light emits continuous light. When the battery level is low,
the indicator light flashes. At the end of use, press the ON/OFF button to switch off the
appliance and put it back on its charging base to charge the battery for future use.
IV. CLEANING AND MAINTENANCE
Always unplug the appliance before cleaning it.
The appliance, the charging base, the motorized brush, and the AC
adapter must not be immersed in water. Never immerse those parts
into water or other liquids. Do not use sharp, toxic, and aggressive
products, such as methylated spirits, industrial strippers, or solvents
to clean your appliance as they may damage it.
49
Publicité
