CONTINENTAL EDISON CEVC100G Guide D'utilisation page 51

1
Cleaning the filter unit and its filters:
1. Turn the top of the H11 HEPA filter counterclockwise.
2. Lift it from the filter holder.
3. Lift the cylindrical steel pre-filter from the filter holder to remove it.
Dust the filters dry with a soft brush and rinse them with lukewarm water.
Dry the filters with a clean cloth and let them air dry for 24 hours.
To reassemble the filter unit, proceed as shown in the drawing below:
1. Insert the cylindrical steel pre-filter onto the filter holder.
2. Insert the EPA H11 filter into the filter holder.
3. Turn the EPA H filter clockwise until it locks.
2
The filter unit consists of a plastic filter holder
(G3), a cylindrical steel filter (G2) and an EPA
H11 filter (G1). It is recommended to wash the
filters once a month for optimal performance.
Otherwise, if the filters are too clogged, the
suction performance will decrease.
To disassemble the filter unit, proceed as
shown in the drawing below:
51