Publicité
Les langues disponibles
Les langues disponibles
3
Place the charging base against the wall
making sure that the AC adapter cable is
placed in the slot on the base. Screw the
two screws
(not supplied)
Make sure the base is securely attached
to the wall.
C. Assembling and removing the battery
1
Your battery does not come fitted to the
appliance. Remove the battery from its
packaging and insert it into the slot on the
back of the main body until it "clicks" into
place.
through the base.
4
Slide the back of the appliance into the
location of the wall charging base.
Make sure the adapter plug is fully seated
in the vacuum cleaner charging port.
2
To remove the battery from the main
body, press and hold the battery release
button (located on the battery) and
simultaneously remove the battery by
pulling it upwards.
45
Publicité
