Tripp-Lite SmartPro Serie Manuel Du Propriétaire page 4

Mounting (Rack)
4-Post Mounting
If you want to mount a 4U model UPS in a 4-post rack, a Tripp Lite 4-Post Rackmount Installation Kit
(model: UPSRMRII, sold separately) will be required.
1
Connect the two segments of each shelf
included screws and nuts
loose so that the shelves can be adjusted in the next step.
2
Adjust each shelf to fit your rack, then mount them in the
lowest available space of your rack with the screws, nuts
and washers provided
should face inward. Tighten the screws that connect the
shelf segments .
B
3
Attach the mounting ears
of your equipment
ears should face forward.
4
Using an assistant, lift your equipment and slide it onto
the mounting shelves. Attach your equipment to the rack
by inserting the appropriate hardware
mounting ears and into the rack rails.
201203014 93-2757.indd 4
All manuals and user guides at all-guides.com
continued
(Included with 2U and 3U models. Optional for 4U models.)
A
. Leave the screws slightly
B
. Note that the support ledges
C
to the front mounting holes
D
using the screws provided
E
through the
G
4
using the
B
A
1
C
2
. The
F
E
3
G
4
B
D F
3/15/2012 5:03:39 PM