Tripp-Lite SmartPro Serie Manuel Du Propriétaire page 3

Mounting (Rack)
Mount your equipment in either a 2-post or 4-post rack or rack enclosure. The user must determine the
fitness of hardware and procedures before mounting. If hardware and procedures are not suitable for your
application, contact the manufacturer of your rack or rack enclosure. The procedures described in this
manual are for common rack and rack enclosure types and may not be appropriate for all applications.
Note: The illustrations may differ from your model.
2-Post Mounting
If you want to mount a 2U or 3U model in a 2-post rack, a Tripp Lite 2-Post Rackmount Installation Kit
(model: 2POSTRMKITWM, sold separately) will be required.
2U
X 8
1
3U
X 8
1
4U
X 8
1
Important: Illustrations show the most typical installation configurations; your model may vary.
Use only the pre-drilled screw holes to attach mounting brackets to the sides of the battery pack.
When installing battery packs into the rack, ensure that the weight of the unit is evenly
distributed.
201203014 93-2757.indd 3
All manuals and user guides at all-guides.com
(Included with 4U models. Optional for 2U and 3U models.)
Amount of screws
X 8
2
may vary by model.
3U
2 X 4
4U
2 X 4
3
2U
X 4 X 4
3
3 X 4
3 X 4
3/15/2012 5:03:37 PM
X 4