Black & Decker KC9024FB Mode D'emploi page 9

Battery (fig. E)
If you want to dispose of the tool yourself,
the battery must be removed as described
below and disposed of in accordance with
Cd
local regulations.
Do not short-circuit the battery terminals.
Do not use tools to remove the battery;
only use your fingers.
If possible, operate the tool to run the battery
down completely.
Use a screwdriver to remove the clip (8).
Pull the front part off the tool.
Lift the batteries out of the tool.
Disconnect the wires from the battery terminals.
Place the battery in a suitable packaging to
ensure that the terminals cannot be short-
circuited. Take the battery to your service agent
or a local recycling station. Collected batteries
will be recycled or disposed of properly.
Technical data
Voltage
No-load speed
Max. torque
Bit holder
Weight
Charger
Input voltage
Approx. charging time
Weight
GUARANTEE (UK, SOUTH AFRICA,
AUSTRALIA AND NEW ZEALAND ONLY)
Should your Black & Decker product become
defective due to faulty materials or workmanship,
within 24 months from the date of purchase, we
guarantee to either replace all defective parts or -at
our discretion- to replace the unit free of charge,
provided that:
The product is returned to us or one of our
authorised repair agents with proof of purchase.
The product has not been used for trade,
professional or hire purposes.
All manuals and user guides at all-guides.com
This guarantee is offered as an extra benefit and
does not affect your statutory rights.
Black & Decker offers a nationwide network of
authorised repair agents. The use of other than
genuine Black & Decker parts and accessories may
reduce the performance of the tool and cause
personal injury and material damage. The terms
and conditions of the warranty could also be
rendered void.
KC9024FB Full details on our after-sales service are available
V 2.4 on the Internet at www.2helpU.com.
DC
min -1 150 Alternatively, contact our Service and Information
Nm 2.45 Centre at the address towards the back of this
6.35 mm hex manual.
kg 0.26
It is our aim that all Black & Decker customers
should be totally satisfied with their
V 230 Black & Decker product and our after sales service.
AC
h 12 If any help or advice is needed, please contact
kg 0.14 your local Black & Decker repair agent.
If your product needs repair, please take or send it
to an authorised repair agent, providing proof of
purchase if claiming a guarantee repair.
The product has not been subjected to misuse
or neglect.
The product has not sustained any damage
through foreign objects, substances or accidents.
Repairs have not been attempted by anyone
other than our service staff or authorised repair
agents.
AFTER SALES SERVICE
(UK, SOUTH AFRICA, AUSTRALIA
AND NEW ZEALAND ONLY)
OUR AFTER SALES SERVICE POLICY
(UK, AUSTRALIA AND NEW ZEALAND
ONLY)
E N G L I S H
9