Black & Decker KC9024FB Mode D'emploi page 5

CORDLESS SCREWDRIVER KC9024FB
CONGRATULATIONS!
You have chosen a Black & Decker tool. Our aim is
to provide quality tools at an affordable price.
We hope that you will enjoy using this tool for
many years.
EC DECLARATION OF CONFORMITY
KC9024FB
Black & Decker declares that these tools
conform to:
98/37/EC, 89/336/EEC, 73/23/EEC,
EN 50260, EN 55014-1, EN 55014-2,
EN 61000-3-2, EN 61000-3-3, EN 60335
Level of sound pressure, measured according to
EN 50260:
L (sound pressure)
pA
L (acoustic power)
WA
Hand/arm weighted vibration value according to
EN 50260:
Colin Wills
Director of Engineering
BDCI, 4/F, 2 Dai Wang Street
Tai Po Industrial Estate
Tai Po NT, Hong Kong
All manuals and user guides at all-guides.com
KC9024FB
dB(A) 70
dB(A) 85
KC9024FB
2
< 2.5 m/s
INTENDED USE
Your Black & Decker screwdriver KC9024FB has
been designed for inserting and removing screws
and nuts using the appropriate accessories.
This tool is intended for consumer use only.
Your Black & Decker charger has been designed
for charging the battery in the tool with which it
was supplied.
SAFETY INSTRUCTIONS
Warning symbols
The following symbols are used in this manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Read the manual prior to operation.
Fire hazard.
Know your tool
Warning! When using battery-powered
tools, basic safety precautions,
including the following, should always
be followed to reduce the risk of fire,
leaking batteries, personal injury and
material damage.
Read all of this manual carefully before
operating the tool.
Before operating the tool, make sure
that you know how to switch the tool off
in an emergency.
Retain this manual for future reference.
E N G L I S H
5