Makita DF010D Manuel D'instructions page 4

ENGLISH (Original instructions)
1. Button
2. Battery cartridge
3. Lock button
4. Switch
5. Speed change lever
SPECIFICATIONS
Model
Capacities
-1
No load speed (min )
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS DRIVER DRILL
SAFETY WARNINGS
1. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
2. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.
3. Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
4
All manuals and user guides at all-guides.com
Explanation of general view
6. Graduation
7. Adjusting ring
8. Pointer
9. Lamp switch
10. Lamp
Steel
Wood
Wood screw
Machine screw
High (2)
Low (1)
Straight type
Pistol type
4. Always be sure you have a firm footing.
ENE034-1
5. Hold the tool firmly.
6. Keep hands away from rotating parts.
7. Do not leave the tool running. Operate the tool
GEA010-1
8. Do not touch the drill bit or the workpiece
9. Some material contains chemicals which may be
SAVE THESE INSTRUCTIONS.
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
GEB088-1
rules for the subject product. MISUSE or failure to
follow the safety rules stated in this instruction
manual may cause serious personal injury.
IMPORTANT SAFETY
INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all
2. Do not disassemble battery cartridge.
11. Bit
12. Bit-piece
13. Sleeve
DF010D
5 mm
6 mm
Φ3.8 mm x 45 mm
M5
650
200
279 mm
224 mm
0.55 kg
D.C. 7.2 V
Be sure no one is below when using the tool in
high locations.
only when hand-held.
immediately after operation; they may be
extremely hot and could burn your skin.
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
WARNING:
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product using
battery.
ENC007-7