Hilti HDE 500-A22 Mode D'emploi page 20

All manuals and user guides at all-guides.com
5.6 Injecting mortar 7
1. Repeatedly pull the trigger all the way back to the grip.
2. Inject the mortar.
3. Press the release button if you have to interrupt the work.
◁ No further mortar flows from the nozzle.
5.7 Removing the foil pack
1. Set the dispensing mode selector switch to
2. Press the release button.
3. Pull the piston rods back as far as they will go.
4. Swivel the foil pack holder up.
5. Remove the foil pack.
6. Swivel the foil pack holder into the tool.
5.8 Removing foil pack holder
1. Pull the piston rods back as far as they will go.
2. Swivel the foil pack holder up.
3. Press the lock on the foil pack holder.
4. Disengage the foil pack holder from the rear locating lug.
5. Pull the foil pack holder clear of the front locating lug.
5.9 Care and maintenance of cordless tools
WARNING
Risk of electric shock! Attempting care and maintenance with the battery fitted in the tool can lead
to severe injury and burns.
▶ Always remove the battery before carrying out care and maintenance tasks!
Care and maintenance of the tool
• Carefully remove any dirt that may be adhering to parts.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as
these may attack the plastic parts.
Care of the lithium­ion batteries
• Keep the battery free from oil and grease.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as
these may attack the plastic parts.
• Avoid ingress of moisture.
Maintenance
• Check all visible parts and controls for signs of damage at regular intervals and make sure that they all
function correctly.
• Do not operate the cordless tool if signs of damage are found or if parts malfunction. Have the tool
repaired by Hilti Service immediately.
• After cleaning and maintenance, fit all guards or protective devices and check that they function correctly.
Note
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local Hilti Center or online at: www.hilti.com
6 Troubleshooting
6.1 Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable to remedy the problem by
yourself, please contact Hilti Service.
14 English
Printed: 13.12.2016 | Doc-Nr: PUB / 5069934 / 000 / 06
8
.
9