GE 26790 Guide De L'utilisateur page 6

W M
ALL
Because it is necessary to charge the
handset for 12 hours prior to connecting
the phone for use the first time, it is better
to leave the unit on a flat surface during
initial charge before attempting to hang it
on the wall.
1. Set the T/P switch to T for touch-tone
service, or P for pulse (rotary) service. If
you don't know which type of service
you have, check with the phone
company.
2. Set RINGER switch to ON.
3. Place the handset in the base.
4. Connect the power supply cord into the
base and the other end into an AC outlet.
The CHARGE/IN USE indicator comes on,
indicating the battery is charging.
Allow the phone to charge for 12
hours before using the first time. If
you don't charge the phone properly
when you first set up the phone,
perfomance of the battery will be
compromised.
(Installation continued on the
following page.)
6
Get user manuals: See SafeManuals.com
I
OUNT NSTALLATION
1
3
CHARGE
2
CAUTION: Use only the
Thomson 5-2471 power
supply that came with this
unit. Using other power
supplies may damage the unit.
4
MESSAGES
88
PLAY/STOP
REVIEW SKIP
ANSW ON/OFF
ANNOUNCE
MEMO PAGE
ERASE