Publicité
Les langues disponibles
Les langues disponibles
T
ROUBLESHOOTING
C
ORDLESS
Problem
No dial tone
Dial tone is OK,
but can't dial out
Handset does not ring
You experience static,
noise, or fading in and out
Get user manuals:
See SafeManuals.com
P
S
HONE
OLUTIONS
Solution
•
Check installation:
— Is the base power cord connected to a working outlet?
— Is the PHONE indicator on?
— Is the telephone line cord connected to the base unit
•
Connect another phone to the same jack; the problem
might be your wiring or local service.
•
Is the handset out of range of the base?
•
Make sure the battery is properly charged (12 hours).
•
Is the battery pack installed correctly?
•
Did the handset beep when you pressed the PHONE
button? Did the PHONE indicator come on? The battery
may need to be charged.
•
Place the handset in the base for at least 20 seconds.
•
Make sure the T/P switch on the base is correctly set.
•
Make sure the RINGER switch on the handset is turned to
ON.
•
Move closer to the base. The handset may be out of range.
•
You may have too many extension phones on your line. Try
unplugging some phones.
•
Check for dial tone.
•
Change channels.
•
Move closer to base (handset might be out of range).
•
Does the base need to be relocated? Make sure base is not
plugged into an outlet with another household appliance.
•
Charge battery.
G
UIDE
and the wall jack?
27
Publicité
