Hitachi HARC-BX E Manuel D'installation page 10

All manuals and user guides at all-guides.com
/
WIRING CONNECTION
4 8
2. Fixing Method by Screw(M4) (Screws: Field-supplied)
By using screw (M4 Screw, 4Position), fix HARC-BX E on the wall.
4 WIRING CONNECTION
Read and understand SAFETY SAMMARY as described in the beginning of this manual
before starting up wiring work.
Wiring work should perform according to"the local regulations" and the instruction of
I
utility company beforehand.
Wiring work should be perfomed by qualified electrician.
I
I Electircal leakage breaker should be porvided according to "the local regurations".
4.1. Wiring
1. Wiring work of Power supply Wiring for HARC-BX E, transmission cable between
packaged air conditioners, and transmission cable between upper monitoring
equipment are required for HARC-BX E.