McQuay CC 10CW Instructions D'installation page 6

- Outline and Dimensions
- Safety Precautions
- Installation Diagram
- Installation of The Indoor Unit
- Electrical Connection
- Water Piping Connection
- Electrical Wiring Connection
- Overall Checking
- Service and Maintenance
- Trouble Shooting
Before installing the air conditioner unit, please read the following safety precautions carefully.
• Installation and maintenance should be performed by qualified persons who are familiar with local code and
regulation, and experienced with this type of appliance.
• All field wiring must be installed in accordance with the national wiring regulation.
• Ensure that the rated voltage of the unit corresponds to that of the name plate before commencing wiring work
according to the wiring diagram.
• The unit must be GROUNDED to prevent possible hazard due to insulation failure.
• All electrical wiring must not touch the water piping and any moving parts of the fan motors.
• Confirm that the unit has been switched OFF before installing or servicing the unit.
DO NOT INSTALL OR USE THE AIR CONDITIONER UNIT IN A LAUNDRY ROOM.
Please take note on the following important points when installing.
• Ensure that the drainage piping is connected properly.
If the drainage piping is not connected properly, it may cause water leakage which will dampen the
furniture.
• Ensure that the unit panel is covered back after service or installation.
Unsecured panel will cause unit to operate noisily.
All manuals and user guides at all-guides.com
CONTENTS
SAFETY PRECAUTIONS
! Warning
IMPORTANT
! Caution
1-2
page i-ii
page 2
page 3
page 3
page 3
page 4
page 4
page 5
page 5
page 6