Beem POUR OVER Mode D'emploi page 31

Les langues disponibles

03380_Inlay_DE-EN-FR-ES-IT_A6.indb 29

Cleaning and Care

PLEASE NOTE!

•

Do not use any toxic, corrosive or abrasive cleaning

agents or scouring sponges to clean the product. These

may damage the surfaces.

1. Make sure that all components have cooled down

sufﬁ ciently before you clean them.

2. Empty the coffee jug and the permanent ﬁ lter completely.

3. Take the lid off the coffee jug.

4. Wipe the stand and the concrete base with a damp cloth.

5. Clean the coffee jug, the lid and the permanent ﬁ lter with

warm water and a little detergent. The permanent ﬁ lter on

its own is also dishwasher-safe.

Storage

•

Clean all components again before you store them away

(see the "Cleaning and Care" chapter) to avoid possible

mould formation. Mould can cause spots and damage on

the product that can no longer be removed / repaired.

Once all components have fully dried, store them in a dry,

clean, frost-free place that is protected from direct sunlight

and cannot be accessed by children or animals.

08.06.2021 16:16:34

03380