Pentair INTELLIBRITE ARCHITECTURAL Serie Guide D'installation Et D'utilisation page 5

Overview
This manual describes how to install, operate and maintain IntelliBrite
Series Pool/Spa Lights.
White Light: White light for your pool/spa.
Color Light: Multiple colors and effects for your pool/spa. Choose from seven pre-
programmed color light shows or five fixed colors to create dramatic lighting effects.
Operating Lights Using a Standard Wall Switch
Lights can be manually controlled using a standard wall-mount light switch. Multiple
lights can be connected, through a junction box, to a single switch allowing all lights to
be switched on and off together.
IntelliBrite lights can also be automatically controlled via Pentair automation systems
and light controllers. Refer to the automation system or light controller manual for wiring
instructions.
Using an External Transformer for Multiple
Lights
(12V Only)
When using multiple 12 VAC lights on a 300 Watt transformer, no more than three lights
should be used.
When operating multiple lights: Distance between the transformer and the lights
should not exceed 100 feet (30.5 m).
When operating a single light: Distance between the transformer and light should not
exceed 200 feet (61 m).
Note: For longer cable lengths, set the transformer to 14 VAC.
300 Watt
Transformer
300 Watt
Transformer
12 Gauge
Junction
Box
(Minimum)
12 Gauge
Junction
Box
(Minimum)
200 ft. (61 m) max.
INTELLIBRITE
INSTALLATION
100 ft. (30.5 m)
Architectural Series Pool/Spa Light Installation and User's Guide
®
1
Architectural
®