Publicité
Les langues disponibles
Les langues disponibles
Manually Selecting a Light Show or Color
Color light can be manually controlled via a standard light switch. When the color light
is switched on it will momentarily illuminate white and then transition to the previously
selected color.
To manually select a color show (1-7) or fixed color (8-12), turn the switch off and on a
specific number of times.
Each number (1-12) shown below corresponds to the number of times the switch must be
turned off/on to activate a specific light show or fixed color.
Example: To select California Sunset Mode; turn the light off/on six times. During this
process the light will not illuminate.
1
SAm Mode: Cycles through
white, magenta, blue and green.
2
Party Mode: Rapid color
changes, building energy and
excitement.
3
Romance Mode: Slow color
transitions creating a calming
effect.
4
Caribbean Mode: Cycles
between a variety of blues and
greens.
5
American Mode: Cycles
through red, white and blue.
6
California Sunset Mode:
Cycles through orange, red and
magenta.
Saving a Color Show or Fixed Color
When power is switched off to color lights, the last color show or fixed color will be
saved. The next time the light is powered on the saved color show or fixed color will be
occur.
Example: While in "Party Mode" switch the light off. Wait more than 10 seconds
and switch the light back on to resume "Party Mode."
During this period precautions should be taken to avoid unforeseen accidents. Failure to observe this warning
may result in serious injury or death.
Note: Pentair color lights can be controlled by Pentair Automation Systems and
Light Controllers. Contact your pool dealer for more information.
During the off/on switching process, before the selected color is displayed, no
illumination will occur for a brief time. This is normal during the switching process.
INTELLIBRITE
7
8
9
10 Red: Fixed color.
11 White: Fixed color.
12 Magenta: Fixed color.
13 Hold: Save the current light
14 Recall: Activate the last
Architectural Series Pool/Spa Light Installation and User's Guide
®
OPERATION
Royal Mode: Richer,
deeper color tones.
Blue: Fixed color.
Green: Fixed color.
show or fixed color.
saved light show or fixed
color.
7
Publicité
