Télécharger Imprimer la page

Pentair INTELLIBRITE ARCHITECTURAL Serie Guide D'installation Et D'utilisation page 3

Publicité

Les langues disponibles

Les langues disponibles

IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT NOTICE - Attention Installer: This Installation and User's
Guide ("Guide") contains important information about the installation,
operation and safe use of this light. This Guide should be given to the owner
and/or operator of this equipment.
instructions can result in severe injury, death, or property damage.
Call (800) 831-7133 for additional free copies of these instructions. Please refer to
www.pentair.com for more information related to this products.
Before Installing luminaires read the following:
water to leak into the assembly which could cause; (a) an electrical hazard resulting
in death or serious injury to pool/spa users, installer, or others due to electrical shock,
or (b) breakage of the lamp or lens, which likewise could result in serious injury to
pool/spa user, installers, or bystanders, or in damage to property.
SERIOUS BODILY INJURY OR DEATH CAN RESULT IF THIS
LIGHT IS NOT INSTALLED AND USED CORRECTLY.
INSTALLERS, POOL/SPA OPERATORS AND POOL/
SPA OWNERS MUST READ THESE WARNINGS AND ALL
INSTRUCTIONS BEFORE USING THE LIGHT.
Most states and local codes regulate the construction, installation, and
operation of public pools and spas, and the construction of residential
pools and spas. It is important to comply with these codes, many of which directly
regulate the installation and use of this product. Consult your local building and health
codes for more information.
RISK OF ELECTRICAL SHOCK OR ELECTROCUTION:
THIS LIGHT REQUIRES HIGH VOLTAGE WHICH CAN SHOCK,
BURN, OR CAUSE DEATH.
BEFORE SERVICING THE LIGHT ALWAYS DISCONNECT
POWER TO THE LIGHT AT THE CIRCUIT BREAKER. Failure
to do so could result in death or serious injury to service
person, pool/spa users or others due to electric shock.
This light must be installed by a licensed or certified electrician or a qualified pool
professional in accordance with the current National Electrical Code (NEC) or the
Canadian Electrical Code (CEC). All applicable local installation codes and ordinances
must also be adhered to. Improper installation will create an electrical hazard which
could result in death or serious injury to pool/spa users, installers or others due to
electrical shock, and may also cause damage to property. Always disconnect the power
to the light at the circuit breaker before servicing the light. Failure to do so could result
in death or serious injury to serviceman, pool/spa users or others due to electrical shock.
THIS LIGHT CANNOT BE USED ON A DIMMER CIRCUIT. USING
A DIMMER SWITCH WILL RESULT IN PERMANENT DAMAGE TO
THE LIGHT.
Before installing this product, read and follow all warning notices
and instructions in this Guide. Failure to follow warnings and
Always install a new Wire Clamp assembly and Lens Gasket
when reassembling the light assembly. Failure to do so may permit
INTELLIBRITE
Architectural Series Pool/Spa Light Installation and User's Guide
®
ii

Publicité

loading