Publicité
Les langues disponibles
Les langues disponibles
Technische Daten | Technical Data
The declared vibration total value and the declared noise emission values
have been measured in accordance with a standard test method and may be
used for comparing one tool with another. The declared vibration total value
may also be used in a preliminary assessment of exposure.
Warning!
The vibration and noise emission during actual use of the power tool can differ
from the declared total value depending on the ways in which the tool is used,
in particular, what kind of work piece is machined.
It is necessary to identify safety measured to protect the operator that are
based on an estimation of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to the trigger time)
Try to minimize the impact of vibration and noise. Exemplary measures to
reduce vibration exposure include wearing gloves while using the tool, limiting
working time, and using accessories in good condition.
Caution! Residual Risks
Even if you use this electric power tool in accordance with instructions, certain
residual risks cannot be rules out. The following hazards may arise in
connection with the equipment's construction and layout:
1. Lung damage if no suitable protective dust mask is used.
2. Damage to hearing if no suitable ear protection is used.
3. Health damage caused by hand-arm vibrations if the equipment is used
over a prolonged period or is not properly guided and maintained.
33
Publicité
