Westfalia X-Grubber Mode D'emploi page 32

3. Insert the hand-tiller into
the extension pole and
fold down the bracket in
order to fix both com-
ponents.
4. Inset the rechargeable
battery (1) into the slot
of the extension pole.
5. For switching on the unit, first press the safety switch (2) on the
extension pole and then depress the ON/OFF-Switch (6) on the
handle of the extension pole. Please note that the ON/OFF switch
on the hand-tiller is out of order while the extension pole is con-
nected.
6. For removing the extension pole, first dismount the bracket and
then depress both releasing buttons on the handle.
Replacement Parts
Replacement Battery 1300 mAh
Replacement Battery 1500 mAh
Replacement Tiller Wheels
Cleaning and Storing

Use a stiff brush and a damp cloth to clean the device. Do not use
aggressive chemicals or abrasive cleaners. Make sure that no
liquids can enter the device. Clean the device immediately after
each use.

Keep all safety devices, air vents and the motor housing free of dirt
and dust as far as possible.

Ensure that all mounting components (i.e. screws, bolts, nuts etc.)
are always tightened so that the device can be safely operated at all
times.

All the metal parts should be cleaned and then oil to ensure that
they provide a long life.
Operation
28
Article No. 81 50 51
Article No. 93 92 77
Article No. 9 36 06 99