auna Glastonbury Go Mode D'emploi page 24

EN
24
Getting started
1. Press and Hold the POWER button to turn on the unit. The unit will
enter standby mode. The display will show "00:00" and flash. The
date and time is automatically set once it receives local broadcast
signals(and when such info is available).
2. Press to POWER button again to enter menu.
(Note: By pressing the POWER button you switch between "ON" mode
and "Standby" mode (showing clock and date).
BT MODE
The first time you use your BT device with this speaker, you will need to or
pair it with the speaker first.
1. Press the MODE button to select BT mode. The display will show
"Pairing" indicating that the system has entered pairing mode and will
be searchable by your BT enabled device.
2. Activate your BT enabled device and select the search mode.
"Glastonbury Go" will appear on your BT device list. Select
"Glastonbury Go" in the pairing list.
3. There will be a prompt sound after the successful pairing. The display
will show "Connected". If the pairing device is disconnected, the unit
will also issue a prompt sound.
AUX IN MODE
Press the MODE button to select AUX mode. use 3.5mm audio cable(not
provided) to connect player with other audio output devices(such as:mobile
phone, etc):
FM MODE
1. This radio antenna is on the back of the machine. When you need to
listen to radio, please extend the antenna.
2. Press the MODE button to select FM mode.
3. Search for station
• Hold and press the
station. The unit will store radio stations automatically after the search
is complete. Press the
• Press the
button to automatically search for
⏮ ⏭
or button to select the station.
to manually search for station.