Publicité
Les langues disponibles
Les langues disponibles
3.6
MOBILE HOME
THE STRUCTURAL INTEGRITY OF THE MOBILE HOME FLOOR, WALL AND CEILING/ROOF MUST BE
THE APPLIANCE MUST BE PROVIDED WITH OUTSIDE COMBUSTION AIR.
USE A CHIMNEY CERTIFIED FOR WOOD BURNING UL 103 S629, TYPE HT (2100°F).
MODEL 1100ML, 1100C, 1400ML, and 1400C ARE APPROVED FOR INSTALLATION IN MOBILE HOMES
IN THE UNITED STATES ONLY.
For specifi c clearances, see "MINIMUM
CLEARANCES TO COMBUSTIBLES" section.
The appliance must be installed between ceiling
joists, with radiation shield and roof fl ashing, so that
the structural strength, insulation and waterproof
qualities of the home are not lessened. Seal with
silicone to maintain a vapour barrier at the chimney
and outside air pipe penetrations.
This model is equipped with holes so that the
appliance can be bolted securely to the fl oor.
All manuals and user guides at all-guides.com
WARNING
!
DO NOT INSTALL IN SLEEPING ROOM.
MAINTAINED.
THE APPLIANCE MUST BE BOLTED TO THE FLOOR.
INSTALL ACCORDING TO 24 CFR, PART 3280 (HUD).
RAIN CAP
MOBILE HOME
ROOF FLASHING
RADIATION SHIELD
CEILING SUPPORT
TRIM COLLAR
APPLIANCE
BOLTED TO FLOOR
HEARTH PAD
OUTSIDE AIR CONNECTION
THROUGH WALL OR FLOOR
11
EN
REMOVE TO
ALLOW FOR
TRANSPORATION
W415-1467 / 04.22.15
Publicité
