Dell K788N Démarrage page 7

Removing the Battery Connector Cover
NOTE:
A small amount of arcing may occur when connecting an EBM to the UPS. This is normal and will not
harm personnel. Insert the EBM cable into the UPS battery connector quickly and firmly.
NOTE:
If the UPS is stored or used without an EBM, the battery connector cover must be installed as a safety
precaution.
2
Remove the battery connector cover from the rear panel. Retain the cover and screws.
Installing the Strain Relief Bracket
All manuals and user guides at all-guides.com
|
5
Installation