Power Fist 8160657 Mode D'emploi page 8

V 2.8
MAINTENANCE
1. Changing The Nozzle Set:
When changing to a different nozzle size, make sure that the complete nozzle set is exchanged.
A set comprises of air cap, paint needle and paint nozzle. Insert the paint nozzle before putting
in the paint needle.
2. Changing The Self Tensioning Seals:
The needle seal is secured by a Teflon gasket and needle gasket with a self-tensioning
compression spring. To change the gasket, please use the socket spanner / wrench provided.
3. Cleaning And Gun Care:
a. Flush the gun thoroughly with solvent.
b. Clean the air nozzle with a brush. Do not submerge the paint gun into solvent to clean.
c. Clogged holes should be cleaned with solvents or other liquids. Plugged holes should
never be dislodged with improper objects, as the smallest amount of damage may badly
influence the spray pattern.
d. Slightly oil movable parts.
DISPOSING OF THE TOOL
If your HVLP paint gun has become damaged beyond repair, do not throw it out. Take it to the appropriate
recycling facility.
8
HVLP Paint Gun
For technical questions call: 1-800-665-8685
8160657