Publicité
Les langues disponibles
Les langues disponibles
V 2.8
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean and well lit.
2.
Do not use in the presence of flammable gases or liquids.
3.
Keep anyone not wearing the appropriate safety equipment away from the work area.
NOTE: Minimize distractions in the work environment. Distractions can cause you to lose
control of the tool.
4.
Always lock up tools and keep them out of the reach of children.
5.
Store tool properly in a safe and dry location to prevent rust or damage.
PERSONAL SAFETY
CAUTION! Wear protective equipment approved by the Canadian Standards Association (CSA) or
American National Standards Institute (ANSI) when using the tool.
1.
Dress properly, wear protective equipment. Use breathing, ear, eye, face, foot, hand, and head
protection. Always wear ANSI approved impact safety goggles, which must provide both frontal
and side protection. Protect your hands with suitable gloves. Protect your head from falling
objects by wearing a hard hat. Wear an ANSI approved dust mask or respirator when working
around chemical dusts and mists. Wear ANSI approved earplugs. Protective, electrically
non-conductive clothes and non-skid footwear are recommended when working.
Wear steel-toed boots to prevent injury from falling objects.
2.
Control the tool, personal movement and the work environment to avoid personal injury or
damage to the tool. Stay alert, watch what you are doing and use your common sense.
3.
Keep articles of clothing, jewelry, hair, etc., away from moving parts to avoid entanglement
with a tool.
4.
Do not operate any machine / tool when tired or under the influence of drugs, alcohol or medications.
5.
Do not overreach when operating a tool. Proper footing and balance enables better control of a
tool in unexpected situations.
4
HVLP Paint Gun
For technical questions call: 1-800-665-8685
8160657
Publicité
