LG C330 Mode D'emploi page 77

All manuals and user guides at all-guides.com
3 Your LG-C330 will search for devices. When the search is completed,
Refresh will appear on screen.
4 Choose the device you want to pair with and enter the passcode, then
touch OK.
5 Your phone will then connect to the other device, on which you will need to
enter the same passcode.
6 Your passcode protected Bluetooth connection is now ready.
Sending and receiving your files using Bluetooth
To send a file:
1 Open the file you want to send, typically this will be a photo, video or music
file.
2 Choose Send via. Choose Bluetooth.
3 If you have already paired the Bluetooth device, your LG-C330 will not
automatically search for other Bluetooth devices. If not, your LG-C330 will
search for other Bluetooth enabled devices within range.
4 Choose the device you want to send the file to.
5 Your file will be sent.
To receive a file:
1 To receive files, your Bluetooth must be both ON and Visible. See
Changing your Bluetooth settings below for more information.
2 A message will prompt you to accept the file from the sender. Touch Yes to
receive the file.
3 You will see where the file has been saved. For image files, you can choose
to View the file. Files will usually be saved to the appropriate folder in My
stuff.
4