Wohler H 420 Mode D'emploi page 27

Fig. 24: Mounting the Viper Stand (op-
tion)
Fig. 25: Black screw and bore holes
Fig. 26: Mounting the Viper Stand
Fig. 27: Viper Stand, retracted.
•
Push the bearing surface of the stand under
the seat area of the Wöhler Viper.
•
Turn the black screw to an upright position.
NOTE!
If you constantly use the viper with the stand, we
recommend to connect the viper and the stand
with three screws, using the correspondent bore
holes.
For a secure stand, fix the Viper Stand with your
foot when working.
The Viper Stand is retractable for the transport.
Getting started
27
EN