Bissell ProHeat 2X 8920 Serie Mode D'emploi page 16

Stain Removal (Continued)
4.
5.
6.
7.
Bare Floor Cleaning
Your ProHeat 2X model may have already come
with a Bare Floor attachment and Hard Floor
Solutions Formula. If not, these products are
available for purchase by contacting the BISSELL
Consumer Services department by phone or at
the website. The Bare Floor tool provides effective
cleaning for linoleum, vinyl, and tile floors.
Caution: Do not use on hardwood floors.
1.
2.
3.
4.
5.
6.
7.
8.
16 16
Be sure to test any spot removal formulas in
an inconspicuous area first. This is important
as some dyes and materials could be damaged
or discoloured by cleaning solvents. If such a
change should occur, try a different solution or
call a professional.
If cleaning on Berber carpeting, gently run your
machine over a hidden area. If no fuzzing occurs,
continue cleaning in soiled area.
Using the BISSELL Tough Stain PreCleaner,
spray evenly over soiled area. Do not overwet.
Wait 3-5 minutes. Gently work the solution by
blotting area with a clean, damp, colour safe
cloth.
Clean using either the Floor Setting, or Hose
Attachment Setting on the Ready Tools Dial.
Vacuum or Sweep thoroughly to pick up any
loose debris and pet hair.
Move any furniture, if needed.
Empty any carpet cleaning formula back into the
BISSELL bottle if stored in the Formula Tank. Fill
Formula Tank with BISSELL Hard Floor Solutions,
available at many retailers, or contact BISSELL
Consumer Services.
Fill the Water Tank with Hot Tap Water and Set Aside.
Attach the Bare Floor Tool onto the bottom of the
machine underneath the Floor Nozzle.
Check Ready Tools Dial. It should be set on
Floor Cleaning.
Set the Custom Clean Dial to Normal Clean.
Plug into an outlet and turn the Power Switch
( I )
and Heater ON .
6
5